Walton Primo H8 Turbo
Walton Primo H8 Turbo is a Walton firmware file listed under Walton, distributed as Walton_Primo_H8_Turbo_MT6739_2GB_Ram_V24_20190717.zip with a download size of 1 GB. It is built for the MediaTek MT6739 chipset, with a firmware build date of July 17, 2019. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 16 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Walton Primo H8 Turbo
If your Walton Primo H8 Turbo has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Walton flash package along with the details to check before you begin. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Walton Primo H8 Turbo to factory condition. File Name: Walton_Primo_H8_Turbo_MT6739_2GB_Ram_V24_20190717.zip File Size: 1 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. With the stock ROM back in place, the Walton Primo H8 Turbo returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Walton Primo H8 Turbo |
|---|---|
| Package | Walton_Primo_H8_Turbo_MT6739_2GB_Ram_V24_20190717.zip |
| Brand / Platform | Walton |
| Category | Walton |
| Chipset | MediaTek MT6739 |
| Build date | July 17, 2019 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Walton Primo H8 Turbo with SP Flash Tool
- Confirm Walton Primo H8 Turbo matches your exact device model and that the phone uses the MT6739 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6739 Firmware Guide: Flashing Tools and InstructionsThe MT6739 is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Walton Primo H8 Turbo free to download?
Yes, Walton Primo H8 Turbo can be downloaded free of charge from this page.
How large is the download?
The Walton Primo H8 Turbo package is 1 GB.
Which tool do I need to flash Walton Primo H8 Turbo?
Walton Primo H8 Turbo is MediaTek MT6739 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Walton devices. Always confirm it matches your specific model before flashing.