Vestel

Vestel Venus V3 5010

Vestel_Venus_V3_5010_V3.7_21102016_QFIL.zip
June 16, 2026 Vestel 1013 MB Vestel

Vestel Venus V3 5010 is a Vestel firmware file listed under Vestel, distributed as Vestel_Venus_V3_5010_V3.7_21102016_QFIL.zip with a download size of 1013 MB. It is built for Qualcomm-based devices, with a firmware build date of October 21, 2016. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 13 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1013 MB
Download Free

About Vestel Venus V3 5010

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Vestel Venus V3 5010 owners, this page hosts the original Vestel stock ROM and the key file details. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Vestel Venus V3 5010 a fresh start without the clutter that builds up over time. File Name: Vestel_Venus_V3_5010_V3.7_21102016_QFIL.zip File Size: 1013 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. When it finishes, the Vestel Venus V3 5010 restarts with clean factory software. Match the firmware to your variant and follow each step in order.

File Details

File nameVestel Venus V3 5010
PackageVestel_Venus_V3_5010_V3.7_21102016_QFIL.zip
Brand / PlatformVestel
CategoryVestel
PlatformQualcomm
Build dateOctober 21, 2016
Flash toolQFIL (part of Qualcomm QPST)
Package formatZIP archive
File size1013 MB
Date addedJune 16, 2026
PriceFree

How to flash Vestel Venus V3 5010 with QFIL

  1. Confirm Vestel Venus V3 5010 matches your exact device model and that it is intended for Vestel hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1013 MB) using the button above and extract it on a Windows PC.
  4. Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
  5. In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
  6. Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
  7. Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.

Frequently asked questions

Is Vestel Venus V3 5010 free to download?

Yes, Vestel Venus V3 5010 can be downloaded free of charge from this page.

How large is the download?

The Vestel Venus V3 5010 package is 1013 MB.

Which tool do I need to flash Vestel Venus V3 5010?

Vestel Venus V3 5010 is Qualcomm firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.

Which devices is this firmware for?

This file is intended for Vestel devices. Always confirm it matches your specific model before flashing.

More Vestel files

Back to Vestel