Vestel

Vestel Leo

Vestel_Leo_MSM8909_VL1100_20170429_6.0.1_QPST.zip
June 16, 2026 Vestel 975 MB Vestel

Vestel Leo is a Vestel firmware file listed under Vestel, distributed as Vestel_Leo_MSM8909_VL1100_20170429_6.0.1_QPST.zip with a download size of 975 MB. It is built for the Qualcomm MSM8909 chipset and runs Android 6.0 (Marshmallow), with a firmware build date of April 29, 2017. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 11 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
975 MB
Download Free

About Vestel Leo

The Vestel Leo runs on Vestel's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Vestel Leo a fresh start without the clutter that builds up over time. File Name: Vestel_Leo_MSM8909_VL1100_20170429_6.0.1_QPST.zip File Size: 975 MB Back up your files, charge the Vestel Leo past 50 percent, install the matching drivers, and only then begin. Once installed, your Vestel Leo should boot up like new. Use the right file for your exact model and don't interrupt the process.

File Details

File nameVestel Leo
PackageVestel_Leo_MSM8909_VL1100_20170429_6.0.1_QPST.zip
Brand / PlatformVestel
CategoryVestel
ChipsetQualcomm MSM8909
Android versionAndroid 6.0 (Marshmallow)
Build dateApril 29, 2017
Flash toolQFIL (part of Qualcomm QPST)
Package formatZIP archive
File size975 MB
Date addedJune 16, 2026
PriceFree

How to flash Vestel Leo with QFIL

  1. Confirm Vestel Leo matches your exact device model and that the phone uses the MSM8909 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (975 MB) using the button above and extract it on a Windows PC.
  4. Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
  5. In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
  6. Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
  7. Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.

Frequently asked questions

Is Vestel Leo free to download?

Yes, Vestel Leo can be downloaded free of charge from this page.

How large is the download?

The Vestel Leo package is 975 MB.

Which tool do I need to flash Vestel Leo?

Vestel Leo is Qualcomm MSM8909 firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.

What Android version is Vestel Leo?

This firmware is Android 6.0 (Marshmallow), built on April 29, 2017.

Which devices is this firmware for?

This file is intended for Vestel devices. Always confirm it matches your specific model before flashing.

More Vestel files

Back to Vestel