Vestel Venus E5
Vestel Venus E5 is a Vestel firmware file listed under Vestel, distributed as Vestel_Venus_E5_MT6763_V1.02_270919_9.0.zip with a download size of 2 GB. It is built for the MediaTek MT6763 chipset and runs Android 9 (Pie). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 9 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Vestel Venus E5
If your Vestel Venus E5 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Vestel flash package along with the details to check before you begin. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Vestel Venus E5 back to square one. File Name: Vestel_Venus_E5_MT6763_V1.02_270919_9.0.zip File Size: 2 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the Vestel Venus E5 should run like a brand new unit.
File Details
| File name | Vestel Venus E5 |
|---|---|
| Package | Vestel_Venus_E5_MT6763_V1.02_270919_9.0.zip |
| Brand / Platform | Vestel |
| Category | Vestel |
| Chipset | MediaTek MT6763 |
| Android version | Android 9 (Pie) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 2 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Vestel Venus E5 with SP Flash Tool
- Confirm Vestel Venus E5 matches your exact device model and that the phone uses the MT6763 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (2 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Vestel Venus E5 free to download?
Yes, Vestel Venus E5 can be downloaded free of charge from this page.
How large is the download?
The Vestel Venus E5 package is 2 GB.
Which tool do I need to flash Vestel Venus E5?
Vestel Venus E5 is MediaTek MT6763 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Vestel Venus E5?
This firmware is Android 9 (Pie).
Which devices is this firmware for?
This file is intended for Vestel devices. Always confirm it matches your specific model before flashing.