Tecno T733
Tecno T733 is a Tecno firmware file listed under Tecno, distributed as Tecno_T733_MT6261_21042015_FMTK.zip with a download size of 21 MB. It is built for the MediaTek MT6261 chipset, with a firmware build date of April 21, 2015. It is flashed with SP Flash Tool. It was published on June 09, 2026. This page has been viewed 20 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Tecno T733
Tecno T733 Stock ROM Firmware (Flash File) The Stock ROM (firmware) can be used to reinstall the operating system (OS) on the mobile device. It can be very handy when experiencing software errors, facing a device start-up loop, dealing with battery drain issues, or upgrading or downgrading the mobile OS. File Name: Tecno_T733_MT6261_21042015_FMTK.zip File Size: 21 MB Flash Tool: MTK Flash Tool How-to Flash (install): Follow Tutorial Get Link
File Details
| File name | Tecno T733 |
|---|---|
| Package | Tecno_T733_MT6261_21042015_FMTK.zip |
| Brand / Platform | Tecno |
| Category | Tecno |
| Chipset | MediaTek MT6261 |
| Build date | April 21, 2015 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 21 MB |
| Date added | June 09, 2026 |
| Price | Free |
How to flash Tecno T733 with SP Flash Tool
- Confirm Tecno T733 matches your exact device model and that the phone uses the MT6261 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (21 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Tecno T733 free to download?
Yes, Tecno T733 can be downloaded free of charge from this page.
How large is the download?
The Tecno T733 package is 21 MB.
Which tool do I need to flash Tecno T733?
Tecno T733 is MediaTek MT6261 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Tecno devices. Always confirm it matches your specific model before flashing.