Tecno M3
Tecno M3 is a Tecno firmware file listed under Tecno, distributed as Tecno_M3_MT6572_20130821.zip with a download size of 282.5 MB. It is built for the MediaTek MT6572 chipset, with a firmware build date of August 21, 2013. It is flashed with SP Flash Tool. It was published on June 09, 2026. This page has been viewed 14 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Tecno M3
Tecno M3 Stock ROM Firmware (Flash File) The Stock ROM (firmware) can be used to reinstall the operating system (OS) on the mobile device. It can be very handy when experiencing software errors, facing a device start-up loop, dealing with battery drain issues, or upgrading or downgrading the mobile OS. File Name: Tecno_M3_MT6572_20130821.zip File Size: 282.5 MB Android Version: 4.4 Flash Tool: SP Flash Tool for Windows | SP Flash Tool for Linux How-to Flash (install): Follow Tutorial Mirror 1 (Free)Mirror 2 (Paid)
File Details
| File name | Tecno M3 |
|---|---|
| Package | Tecno_M3_MT6572_20130821.zip |
| Brand / Platform | Tecno |
| Category | Tecno |
| Chipset | MediaTek MT6572 |
| Build date | August 21, 2013 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 282.5 MB |
| Date added | June 09, 2026 |
| Price | Free |
How to flash Tecno M3 with SP Flash Tool
- Confirm Tecno M3 matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (282.5 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Tecno M3 free to download?
Yes, Tecno M3 can be downloaded free of charge from this page.
How large is the download?
The Tecno M3 package is 282.5 MB.
Which tool do I need to flash Tecno M3?
Tecno M3 is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Tecno devices. Always confirm it matches your specific model before flashing.