Tecno Camon iAir 2 Plus ID3K
Tecno Camon iAir 2 Plus ID3K is a Tecno firmware file listed under Tecno, distributed as Tecno_Camon_iAir_2_Plus_ID3K_MT6761_V83_180914.zip with a download size of 1 GB. It is built for the MediaTek MT6761 chipset. It is flashed with SP Flash Tool. It was published on June 09, 2026. This page has been viewed 14 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Tecno Camon iAir 2 Plus ID3K
Tecno Camon iAir 2 Plus ID3K Stock ROM Firmware (Flash File) The Stock ROM (firmware) can be used to reinstall the operating system (OS) on the mobile device. It can be very handy when experiencing software errors, facing a device start-up loop, dealing with battery drain issues, or upgrading or downgrading the mobile OS. File Name: Tecno_Camon_iAir_2_Plus_ID3K_MT6761_V83_180914.zip File Size: 1 GB Flash Tool: SP Flash Tool for Windows | SP Flash Tool for Linux How-to Flash (install): Follow Tutorial Mirror 1 (Free)Mirror 2 (Paid)
File Details
| File name | Tecno Camon iAir 2 Plus ID3K |
|---|---|
| Package | Tecno_Camon_iAir_2_Plus_ID3K_MT6761_V83_180914.zip |
| Brand / Platform | Tecno |
| Category | Tecno |
| Chipset | MediaTek MT6761 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | June 09, 2026 |
| Price | Free |
How to flash Tecno Camon iAir 2 Plus ID3K with SP Flash Tool
- Confirm Tecno Camon iAir 2 Plus ID3K matches your exact device model and that the phone uses the MT6761 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Tecno Camon iAir 2 Plus ID3K free to download?
Yes, Tecno Camon iAir 2 Plus ID3K can be downloaded free of charge from this page.
How large is the download?
The Tecno Camon iAir 2 Plus ID3K package is 1 GB.
Which tool do I need to flash Tecno Camon iAir 2 Plus ID3K?
Tecno Camon iAir 2 Plus ID3K is MediaTek MT6761 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Tecno devices. Always confirm it matches your specific model before flashing.