Intex Killer 3
Intex Killer 3 is a Intex firmware file listed under Intex, distributed as Intex_Killer_3_SC6531_20160807_MIRA.zip with a download size of 3 MB. It is built for the Unisoc (Spreadtrum) SC6531 chipset, with a firmware build date of August 07, 2016. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on April 28, 2026. This page has been viewed 5 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Intex Killer 3
Intex Killer 3 Stock Firmware (Flash File) The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: Intex_Killer_3_SC6531_20160807_MIRA.zip File Size: 3 MB Flash Tool: Miracle Tool How to Flash (install): Use Miracle Box Software to Flash the firmware. Get Link
File Details
| File name | Intex Killer 3 |
|---|---|
| Package | Intex_Killer_3_SC6531_20160807_MIRA.zip |
| Brand / Platform | Intex |
| Category | Intex |
| Chipset | Unisoc (Spreadtrum) SC6531 |
| Build date | August 07, 2016 |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 3 MB |
| Date added | April 28, 2026 |
| Price | Free |
How to flash Intex Killer 3 with SPD ResearchDownload
- Confirm Intex Killer 3 matches your exact device model and that the phone uses the SC6531 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (3 MB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Intex Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick an Intex device, you must use a stock ROM that matches your specific model and the corresponding flashing tool for its chipset. Most Intex devices utilize either MediaTek or…
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
Frequently asked questions
Is Intex Killer 3 free to download?
Yes, Intex Killer 3 can be downloaded free of charge from this page.
How large is the download?
The Intex Killer 3 package is 3 MB.
Which tool do I need to flash Intex Killer 3?
Intex Killer 3 is Unisoc (Spreadtrum) SC6531 firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Intex devices. Always confirm it matches your specific model before flashing.