Intex

Intex IN-Fabio

Intex_IN-Fabio_V04_India_SER_20160919_SPD.zip
April 28, 2026 Intex 4 MB Intex

Intex IN-Fabio is a Intex firmware file listed under Intex, distributed as Intex_IN-Fabio_V04_India_SER_20160919_SPD.zip with a download size of 4 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of September 19, 2016. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on April 28, 2026. This page has been viewed 8 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
4 MB
Download Free

About Intex IN-Fabio

Intex IN-Fabio Stock Firmware (Flash File) The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: Intex_IN-Fabio_V04_India_SER_20160919_SPD.zip File Size: 4 MB Flash Tool: SPD Flash Tool How to Flash (install): Follow Tutorial (Mediafire)

File Details

File nameIntex IN-Fabio
PackageIntex_IN-Fabio_V04_India_SER_20160919_SPD.zip
Brand / PlatformIntex
CategoryIntex
PlatformUnisoc (Spreadtrum)
Build dateSeptember 19, 2016
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size4 MB
Date addedApril 28, 2026
PriceFree

How to flash Intex IN-Fabio with SPD ResearchDownload

  1. Confirm Intex IN-Fabio matches your exact device model and that it is intended for Intex hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (4 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Intex IN-Fabio free to download?

Yes, Intex IN-Fabio can be downloaded free of charge from this page.

How large is the download?

The Intex IN-Fabio package is 4 MB.

Which tool do I need to flash Intex IN-Fabio?

Intex IN-Fabio is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Intex devices. Always confirm it matches your specific model before flashing.

More Intex files

Back to Intex