Intex

Intex Cloud 3G Gem

Intex_Cloud_3G_Gem_V03_Indian_SER_20150804_SPD.zip
April 28, 2026 Intex 304 MB Intex

Intex Cloud 3G Gem is a Intex firmware file listed under Intex, distributed as Intex_Cloud_3G_Gem_V03_Indian_SER_20150804_SPD.zip with a download size of 304 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of August 04, 2015. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on April 28, 2026. This page has been viewed 6 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
304 MB
Download Free

About Intex Cloud 3G Gem

Intex Cloud 3G Gem Stock Firmware (Flash File) The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: Intex_Cloud_3G_Gem_V03_Indian_SER_20150804_SPD.zip File Size: 304 MB Flash Tool: SPD Flash Tool How to Flash (install): Follow Tutorial Mirror 1 (Free)Mirror 2 (Paid)

File Details

File nameIntex Cloud 3G Gem
PackageIntex_Cloud_3G_Gem_V03_Indian_SER_20150804_SPD.zip
Brand / PlatformIntex
CategoryIntex
PlatformUnisoc (Spreadtrum)
Build dateAugust 04, 2015
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size304 MB
Date addedApril 28, 2026
PriceFree

How to flash Intex Cloud 3G Gem with SPD ResearchDownload

  1. Confirm Intex Cloud 3G Gem matches your exact device model and that it is intended for Intex hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (304 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Intex Cloud 3G Gem free to download?

Yes, Intex Cloud 3G Gem can be downloaded free of charge from this page.

How large is the download?

The Intex Cloud 3G Gem package is 304 MB.

Which tool do I need to flash Intex Cloud 3G Gem?

Intex Cloud 3G Gem is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Intex devices. Always confirm it matches your specific model before flashing.

More Intex files

Back to Intex