Intex

Intex Aqua Q7N Pro

Intex_Aqua_Q7N_Pro_V04_Indian_SPD.zip
June 16, 2026 Intex 648 MB Intex

Intex Aqua Q7N Pro is a Intex firmware file listed under Intex, distributed as Intex_Aqua_Q7N_Pro_V04_Indian_SPD.zip with a download size of 648 MB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 4 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
648 MB
Download Free

About Intex Aqua Q7N Pro

Looking for the official stock firmware for your Intex Aqua Q7N Pro? You're in the right place. Below is the original Intex flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Intex Aqua Q7N Pro to factory condition. File Name: Intex_Aqua_Q7N_Pro_V04_Indian_SPD.zip File Size: 648 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. Once installed, your Intex Aqua Q7N Pro should boot up like new. Use the right file for your exact model and don't interrupt the process.

File Details

File nameIntex Aqua Q7N Pro
PackageIntex_Aqua_Q7N_Pro_V04_Indian_SPD.zip
Brand / PlatformIntex
CategoryIntex
PlatformUnisoc (Spreadtrum)
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size648 MB
Date addedJune 16, 2026
PriceFree

How to flash Intex Aqua Q7N Pro with SPD ResearchDownload

  1. Confirm Intex Aqua Q7N Pro matches your exact device model and that it is intended for Intex hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (648 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Intex Aqua Q7N Pro free to download?

Yes, Intex Aqua Q7N Pro can be downloaded free of charge from this page.

How large is the download?

The Intex Aqua Q7N Pro package is 648 MB.

Which tool do I need to flash Intex Aqua Q7N Pro?

Intex Aqua Q7N Pro is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Intex devices. Always confirm it matches your specific model before flashing.

More Intex files

Back to Intex