Intex

Intex Aqua Craze 2

Intex_Aqua_Craze_2_L150_M00_S10_160930_SPD.zip
June 16, 2026 Intex 941 MB Intex

Intex Aqua Craze 2 is a Intex firmware file listed under Intex, distributed as Intex_Aqua_Craze_2_L150_M00_S10_160930_SPD.zip with a download size of 941 MB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 4 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
941 MB
Download Free

About Intex Aqua Craze 2

If your Intex Aqua Craze 2 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Intex flash package along with the details to check before you begin. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Intex Aqua Craze 2 to factory condition. File Name: Intex_Aqua_Craze_2_L150_M00_S10_160930_SPD.zip File Size: 941 MB Back up your files, charge the Intex Aqua Craze 2 past 50 percent, install the matching drivers, and only then begin. After flashing, allow a few minutes for the first boot. From there the Intex Aqua Craze 2 should run like a brand new unit.

File Details

File nameIntex Aqua Craze 2
PackageIntex_Aqua_Craze_2_L150_M00_S10_160930_SPD.zip
Brand / PlatformIntex
CategoryIntex
PlatformUnisoc (Spreadtrum)
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size941 MB
Date addedJune 16, 2026
PriceFree

How to flash Intex Aqua Craze 2 with SPD ResearchDownload

  1. Confirm Intex Aqua Craze 2 matches your exact device model and that it is intended for Intex hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (941 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Intex Aqua Craze 2 free to download?

Yes, Intex Aqua Craze 2 can be downloaded free of charge from this page.

How large is the download?

The Intex Aqua Craze 2 package is 941 MB.

Which tool do I need to flash Intex Aqua Craze 2?

Intex Aqua Craze 2 is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Intex devices. Always confirm it matches your specific model before flashing.

More Intex files

Back to Intex