Intex

Intex Aqua Classic Mini

Intex_Aqua_Classic_Mini_SP7731CEB_V05_Vietnam_5.1_SPD.zip
April 28, 2026 Intex 1 GB Intex

Intex Aqua Classic Mini is a Intex firmware file listed under Intex, distributed as Intex_Aqua_Classic_Mini_SP7731CEB_V05_Vietnam_5.1_SPD.zip with a download size of 1 GB. It is built for Unisoc (Spreadtrum)-based devices and runs Android 5.1 (Lollipop). It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on April 28, 2026. This page has been viewed 7 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1 GB
Download Free

About Intex Aqua Classic Mini

Intex Aqua Classic Mini Stock Firmware (Flash File) The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: Intex_Aqua_Classic_Mini_SP7731CEB_V05_Vietnam_5.1_SPD.zip File Size: 1 GB Flash Tool: SPD Flash Tool How to Flash (install): Follow Tutorial Mirror 1 (Free)Mirror 2 (Paid)

File Details

File nameIntex Aqua Classic Mini
PackageIntex_Aqua_Classic_Mini_SP7731CEB_V05_Vietnam_5.1_SPD.zip
Brand / PlatformIntex
CategoryIntex
PlatformUnisoc (Spreadtrum)
Android versionAndroid 5.1 (Lollipop)
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size1 GB
Date addedApril 28, 2026
PriceFree

How to flash Intex Aqua Classic Mini with SPD ResearchDownload

  1. Confirm Intex Aqua Classic Mini matches your exact device model and that it is intended for Intex hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1 GB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Intex Aqua Classic Mini free to download?

Yes, Intex Aqua Classic Mini can be downloaded free of charge from this page.

How large is the download?

The Intex Aqua Classic Mini package is 1 GB.

Which tool do I need to flash Intex Aqua Classic Mini?

Intex Aqua Classic Mini is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

What Android version is Intex Aqua Classic Mini?

This firmware is Android 5.1 (Lollipop).

Which devices is this firmware for?

This file is intended for Intex devices. Always confirm it matches your specific model before flashing.

More Intex files

Back to Intex