Intex Aqua 3G Pro
Intex Aqua 3G Pro is a Intex firmware file listed under Intex, distributed as Intex_Aqua_3G_Pro_V08_Indian_SER_20150516_SPD.zip with a download size of 308 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of May 16, 2015. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on April 28, 2026. This page has been viewed 3 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Intex Aqua 3G Pro
Intex Aqua 3G Pro Stock Firmware (Flash File) The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: Intex_Aqua_3G_Pro_V08_Indian_SER_20150516_SPD.zip File Size: 308 MB Flash Tool: SPD Flash Tool How to Flash (install): Follow Tutorial Mirror 1 (Free)Mirror 2 (Paid)
File Details
| File name | Intex Aqua 3G Pro |
|---|---|
| Package | Intex_Aqua_3G_Pro_V08_Indian_SER_20150516_SPD.zip |
| Brand / Platform | Intex |
| Category | Intex |
| Platform | Unisoc (Spreadtrum) |
| Build date | May 16, 2015 |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 308 MB |
| Date added | April 28, 2026 |
| Price | Free |
How to flash Intex Aqua 3G Pro with SPD ResearchDownload
- Confirm Intex Aqua 3G Pro matches your exact device model and that it is intended for Intex hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (308 MB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Intex Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick an Intex device, you must use a stock ROM that matches your specific model and the corresponding flashing tool for its chipset. Most Intex devices utilize either MediaTek or…
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
Frequently asked questions
Is Intex Aqua 3G Pro free to download?
Yes, Intex Aqua 3G Pro can be downloaded free of charge from this page.
How large is the download?
The Intex Aqua 3G Pro package is 308 MB.
Which tool do I need to flash Intex Aqua 3G Pro?
Intex Aqua 3G Pro is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Intex devices. Always confirm it matches your specific model before flashing.