Intex

Intex Aqua 3G NS

Intex_Aqua_3G_NS_V01_Indian_SER_SPD.zip
June 16, 2026 Intex 393 MB Intex

Intex Aqua 3G NS is a Intex firmware file listed under Intex, distributed as Intex_Aqua_3G_NS_V01_Indian_SER_SPD.zip with a download size of 393 MB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 5 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
393 MB
Download Free

About Intex Aqua 3G NS

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Intex Aqua 3G NS owners, this page hosts the original Intex stock ROM and the key file details. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Intex Aqua 3G NS back to square one. File Name: Intex_Aqua_3G_NS_V01_Indian_SER_SPD.zip File Size: 393 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. When it finishes, the Intex Aqua 3G NS restarts with clean factory software. Match the firmware to your variant and follow each step in order.

File Details

File nameIntex Aqua 3G NS
PackageIntex_Aqua_3G_NS_V01_Indian_SER_SPD.zip
Brand / PlatformIntex
CategoryIntex
PlatformUnisoc (Spreadtrum)
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size393 MB
Date addedJune 16, 2026
PriceFree

How to flash Intex Aqua 3G NS with SPD ResearchDownload

  1. Confirm Intex Aqua 3G NS matches your exact device model and that it is intended for Intex hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (393 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Intex Aqua 3G NS free to download?

Yes, Intex Aqua 3G NS can be downloaded free of charge from this page.

How large is the download?

The Intex Aqua 3G NS package is 393 MB.

Which tool do I need to flash Intex Aqua 3G NS?

Intex Aqua 3G NS is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Intex devices. Always confirm it matches your specific model before flashing.

More Intex files

Back to Intex