Huawei

Huawei P30 Pro Clone

Huawei_P30_Pro_Clone_MT6580_20170305_9.0.zip
June 16, 2026 Huawei 597 MB Huawei

Huawei P30 Pro Clone is a Huawei firmware file listed under Huawei, distributed as Huawei_P30_Pro_Clone_MT6580_20170305_9.0.zip with a download size of 597 MB. It is built for the MediaTek MT6580 chipset and runs Android 9 (Pie), with a firmware build date of March 05, 2017. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 16 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
597 MB
Download Free

About Huawei P30 Pro Clone

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Huawei P30 Pro Clone owners, this page hosts the original Huawei stock ROM and the key file details. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Huawei_P30_Pro_Clone_MT6580_20170305_9.0.zip File Size: 597 MB Back up your files, charge the Huawei P30 Pro Clone past 50 percent, install the matching drivers, and only then begin. Once installed, your Huawei P30 Pro Clone should boot up like new. Use the right file for your exact model and don't interrupt the process.

File Details

File nameHuawei P30 Pro Clone
PackageHuawei_P30_Pro_Clone_MT6580_20170305_9.0.zip
Brand / PlatformHuawei
CategoryHuawei
ChipsetMediaTek MT6580
Android versionAndroid 9 (Pie)
Build dateMarch 05, 2017
Flash toolSP Flash Tool
Package formatZIP archive
File size597 MB
Date addedJune 16, 2026
PriceFree

How to flash Huawei P30 Pro Clone with SP Flash Tool

  1. Confirm Huawei P30 Pro Clone matches your exact device model and that the phone uses the MT6580 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (597 MB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Huawei P30 Pro Clone free to download?

Yes, Huawei P30 Pro Clone can be downloaded free of charge from this page.

How large is the download?

The Huawei P30 Pro Clone package is 597 MB.

Which tool do I need to flash Huawei P30 Pro Clone?

Huawei P30 Pro Clone is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

What Android version is Huawei P30 Pro Clone?

This firmware is Android 9 (Pie), built on March 05, 2017.

Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

More Huawei files

Back to Huawei