# Huawei P30 Pro Clone

> Huawei P30 Pro Clone is a Huawei firmware file listed under Huawei, distributed as Huawei_P30_Pro_Clone_MT6580_20170305_9.0.zip with a download size of 597 MB. It is built for the MediaTek MT6580 chipset and runs Android 9, with a firmware build date of March 05, 2017. It is flashed with SP Flash Tool. It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/huawei-p30-pro-clone-100698>

## File details

- **File name:** Huawei P30 Pro Clone
- **Package:** Huawei_P30_Pro_Clone_MT6580_20170305_9.0.zip
- **Brand / platform:** Huawei
- **Category:** [Huawei](https://www.filefirmware.com/category/huawei)
- **Chipset:** MediaTek MT6580
- **Android version:** Android 9 (Pie)
- **Build date:** March 05, 2017
- **Flash tool:** SP Flash Tool
- **Package format:** ZIP archive
- **File size:** 597 MB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/huawei-p30-pro-clone-100698>

## About Huawei P30 Pro Clone

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Huawei P30 Pro Clone owners, this page hosts the original Huawei stock ROM and the key file details. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Huawei_P30_Pro_Clone_MT6580_20170305_9.0.zip File Size: 597 MB Back up your files, charge the Huawei P30 Pro Clone past 50 percent, install the matching drivers, and only then begin. Once installed, your Huawei P30 Pro Clone should boot up like new. Use the right file for your exact model and don't interrupt the process.

## How to flash Huawei P30 Pro Clone with SP Flash Tool

1. Confirm Huawei P30 Pro Clone matches your exact device model and that the phone uses the MT6580 chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (597 MB) from the web page and extract it on a Windows PC.
4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

## Guides for this firmware

- [MT6580 Firmware Guide: Flashing Tools and Safety](https://www.filefirmware.com/blog/mt6580-firmware-guide-flashing-tools-and-safety): The MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- [Huawei Firmware Guide: Finding and Flashing Stock ROMs](https://www.filefirmware.com/blog/huawei-firmware-guide-finding-and-flashing-stock-roms): To reflash or unbrick a Huawei device, you must identify the exact model number and chipset to find the compatible stock ROM. Depending on the hardware, you will typically use tools like SP Flash…
- [SP Flash Tool: Download Only vs Format All + Download](https://www.filefirmware.com/blog/sp-flash-tool-download-only-vs-format-all-download): SP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…

## Frequently asked questions

### Is Huawei P30 Pro Clone free to download?

Yes, Huawei P30 Pro Clone can be downloaded free of charge from its web page.

### How large is the download?

The Huawei P30 Pro Clone package is 597 MB.

### Which tool do I need to flash Huawei P30 Pro Clone?

Huawei P30 Pro Clone is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

### What Android version is Huawei P30 Pro Clone?

This firmware is Android 9 (Pie), built on March 05, 2017.

### Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

## More Huawei files

- [Huawei Y9 Prime STK-L22](https://www.filefirmware.com/file/huawei-y9-prime-stk-l22-100996) — 1 GB
- [Huawei Y9 Prime STK-L22HN](https://www.filefirmware.com/file/huawei-y9-prime-stk-l22hn-100985) — 3.31 GB
- [Huawei Y9 Prime STK-LX1](https://www.filefirmware.com/file/huawei-y9-prime-stk-lx1-100983) — 2.95 GB
- [Huawei Y9 Prime Stark-L21](https://www.filefirmware.com/file/huawei-y9-prime-stark-l21-100982) — 2.95 GB
- [Huawei Y9 Prime STK-LX2](https://www.filefirmware.com/file/huawei-y9-prime-stk-lx2-100981) — 1 GB
- [Huawei Y9 Prime Stark-L22B](https://www.filefirmware.com/file/huawei-y9-prime-stark-l22b-100978) — 3.54 GB
- [Huawei Y9 Prime STK-L21](https://www.filefirmware.com/file/huawei-y9-prime-stk-l21-100977) — 2.95 GB
- [Huawei Y9 Jackman-L22](https://www.filefirmware.com/file/huawei-y9-jackman-l22-100976) — 3.32 GB

---

*Source: File Firmware — <https://www.filefirmware.com/file/huawei-p30-pro-clone-100698>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
