Huawei

Huawei Mate 20 Pro Clone

Huawei_Mate_20_Pro_Clone_MT6580_20181030.zip
June 16, 2026 Huawei 705 MB Huawei

Huawei Mate 20 Pro Clone is a Huawei firmware file listed under Huawei, distributed as Huawei_Mate_20_Pro_Clone_MT6580_20181030.zip with a download size of 705 MB. It is built for the MediaTek MT6580 chipset, with a firmware build date of October 30, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 16 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
705 MB
Download Free

About Huawei Mate 20 Pro Clone

Looking for the official stock firmware for your Huawei Mate 20 Pro Clone? You're in the right place. Below is the original Huawei flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Huawei Mate 20 Pro Clone to factory condition. File Name: Huawei_Mate_20_Pro_Clone_MT6580_20181030.zip File Size: 705 MB Back up your files, charge the Huawei Mate 20 Pro Clone past 50 percent, install the matching drivers, and only then begin. When it finishes, the Huawei Mate 20 Pro Clone restarts with clean factory software. Match the firmware to your variant and follow each step in order.

File Details

File nameHuawei Mate 20 Pro Clone
PackageHuawei_Mate_20_Pro_Clone_MT6580_20181030.zip
Brand / PlatformHuawei
CategoryHuawei
ChipsetMediaTek MT6580
Build dateOctober 30, 2018
Flash toolSP Flash Tool
Package formatZIP archive
File size705 MB
Date addedJune 16, 2026
PriceFree

How to flash Huawei Mate 20 Pro Clone with SP Flash Tool

  1. Confirm Huawei Mate 20 Pro Clone matches your exact device model and that the phone uses the MT6580 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (705 MB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Huawei Mate 20 Pro Clone free to download?

Yes, Huawei Mate 20 Pro Clone can be downloaded free of charge from this page.

How large is the download?

The Huawei Mate 20 Pro Clone package is 705 MB.

Which tool do I need to flash Huawei Mate 20 Pro Clone?

Huawei Mate 20 Pro Clone is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

More Huawei files

Back to Huawei