# Huawei Mate 20 Pro Clone

> Huawei Mate 20 Pro Clone is a Huawei firmware file listed under Huawei, distributed as Huawei_Mate_20_Pro_Clone_MT6580_20181030.zip with a download size of 705 MB. It is built for the MediaTek MT6580 chipset, with a firmware build date of October 30, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/huawei-mate-20-pro-clone-99907>

## File details

- **File name:** Huawei Mate 20 Pro Clone
- **Package:** Huawei_Mate_20_Pro_Clone_MT6580_20181030.zip
- **Brand / platform:** Huawei
- **Category:** [Huawei](https://www.filefirmware.com/category/huawei)
- **Chipset:** MediaTek MT6580
- **Build date:** October 30, 2018
- **Flash tool:** SP Flash Tool
- **Package format:** ZIP archive
- **File size:** 705 MB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/huawei-mate-20-pro-clone-99907>

## About Huawei Mate 20 Pro Clone

Looking for the official stock firmware for your Huawei Mate 20 Pro Clone? You're in the right place. Below is the original Huawei flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Huawei Mate 20 Pro Clone to factory condition. File Name: Huawei_Mate_20_Pro_Clone_MT6580_20181030.zip File Size: 705 MB Back up your files, charge the Huawei Mate 20 Pro Clone past 50 percent, install the matching drivers, and only then begin. When it finishes, the Huawei Mate 20 Pro Clone restarts with clean factory software. Match the firmware to your variant and follow each step in order.

## How to flash Huawei Mate 20 Pro Clone with SP Flash Tool

1. Confirm Huawei Mate 20 Pro Clone matches your exact device model and that the phone uses the MT6580 chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (705 MB) from the web page and extract it on a Windows PC.
4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

## Guides for this firmware

- [MT6580 Firmware Guide: Flashing Tools and Safety](https://www.filefirmware.com/blog/mt6580-firmware-guide-flashing-tools-and-safety): The MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- [Huawei Firmware Guide: Finding and Flashing Stock ROMs](https://www.filefirmware.com/blog/huawei-firmware-guide-finding-and-flashing-stock-roms): To reflash or unbrick a Huawei device, you must identify the exact model number and chipset to find the compatible stock ROM. Depending on the hardware, you will typically use tools like SP Flash…
- [SP Flash Tool: Download Only vs Format All + Download](https://www.filefirmware.com/blog/sp-flash-tool-download-only-vs-format-all-download): SP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…

## Frequently asked questions

### Is Huawei Mate 20 Pro Clone free to download?

Yes, Huawei Mate 20 Pro Clone can be downloaded free of charge from its web page.

### How large is the download?

The Huawei Mate 20 Pro Clone package is 705 MB.

### Which tool do I need to flash Huawei Mate 20 Pro Clone?

Huawei Mate 20 Pro Clone is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

### Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

## More Huawei files

- [Huawei Y9 Prime STK-L22](https://www.filefirmware.com/file/huawei-y9-prime-stk-l22-100996) — 1 GB
- [Huawei Y9 Prime STK-L22HN](https://www.filefirmware.com/file/huawei-y9-prime-stk-l22hn-100985) — 3.31 GB
- [Huawei Y9 Prime STK-LX1](https://www.filefirmware.com/file/huawei-y9-prime-stk-lx1-100983) — 2.95 GB
- [Huawei Y9 Prime Stark-L21](https://www.filefirmware.com/file/huawei-y9-prime-stark-l21-100982) — 2.95 GB
- [Huawei Y9 Prime STK-LX2](https://www.filefirmware.com/file/huawei-y9-prime-stk-lx2-100981) — 1 GB
- [Huawei Y9 Prime Stark-L22B](https://www.filefirmware.com/file/huawei-y9-prime-stark-l22b-100978) — 3.54 GB
- [Huawei Y9 Prime STK-L21](https://www.filefirmware.com/file/huawei-y9-prime-stk-l21-100977) — 2.95 GB
- [Huawei Y9 Jackman-L22](https://www.filefirmware.com/file/huawei-y9-jackman-l22-100976) — 3.32 GB

---

*Source: File Firmware — <https://www.filefirmware.com/file/huawei-mate-20-pro-clone-99907>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
