Huawei

Huawei A6S Clone

Huawei_A6S_Clone_MT6580_20190125_8.1.zip
June 16, 2026 Huawei 721 MB Huawei

Huawei A6S Clone is a Huawei firmware file listed under Huawei, distributed as Huawei_A6S_Clone_MT6580_20190125_8.1.zip with a download size of 721 MB. It is built for the MediaTek MT6580 chipset and runs Android 8.1 (Oreo), with a firmware build date of January 25, 2019. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 11 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
721 MB
Download Free

About Huawei A6S Clone

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Huawei A6S Clone owners, this page hosts the original Huawei stock ROM and the key file details. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Huawei A6S Clone back to square one. File Name: Huawei_A6S_Clone_MT6580_20190125_8.1.zip File Size: 721 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. With the stock ROM back in place, the Huawei A6S Clone returns to factory state. If something fails, verify the file matches your model and retry.

File Details

File nameHuawei A6S Clone
PackageHuawei_A6S_Clone_MT6580_20190125_8.1.zip
Brand / PlatformHuawei
CategoryHuawei
ChipsetMediaTek MT6580
Android versionAndroid 8.1 (Oreo)
Build dateJanuary 25, 2019
Flash toolSP Flash Tool
Package formatZIP archive
File size721 MB
Date addedJune 16, 2026
PriceFree

How to flash Huawei A6S Clone with SP Flash Tool

  1. Confirm Huawei A6S Clone matches your exact device model and that the phone uses the MT6580 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (721 MB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Huawei A6S Clone free to download?

Yes, Huawei A6S Clone can be downloaded free of charge from this page.

How large is the download?

The Huawei A6S Clone package is 721 MB.

Which tool do I need to flash Huawei A6S Clone?

Huawei A6S Clone is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

What Android version is Huawei A6S Clone?

This firmware is Android 8.1 (Oreo), built on January 25, 2019.

Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

More Huawei files

Back to Huawei