# Huawei A6S Clone

> Huawei A6S Clone is a Huawei firmware file listed under Huawei, distributed as Huawei_A6S_Clone_MT6580_20190125_8.1.zip with a download size of 721 MB. It is built for the MediaTek MT6580 chipset and runs Android 8.1, with a firmware build date of January 25, 2019. It is flashed with SP Flash Tool. It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/huawei-a6s-clone-99446>

## File details

- **File name:** Huawei A6S Clone
- **Package:** Huawei_A6S_Clone_MT6580_20190125_8.1.zip
- **Brand / platform:** Huawei
- **Category:** [Huawei](https://www.filefirmware.com/category/huawei)
- **Chipset:** MediaTek MT6580
- **Android version:** Android 8.1 (Oreo)
- **Build date:** January 25, 2019
- **Flash tool:** SP Flash Tool
- **Package format:** ZIP archive
- **File size:** 721 MB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/huawei-a6s-clone-99446>

## About Huawei A6S Clone

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Huawei A6S Clone owners, this page hosts the original Huawei stock ROM and the key file details. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Huawei A6S Clone back to square one. File Name: Huawei_A6S_Clone_MT6580_20190125_8.1.zip File Size: 721 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. With the stock ROM back in place, the Huawei A6S Clone returns to factory state. If something fails, verify the file matches your model and retry.

## How to flash Huawei A6S Clone with SP Flash Tool

1. Confirm Huawei A6S Clone matches your exact device model and that the phone uses the MT6580 chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (721 MB) from the web page and extract it on a Windows PC.
4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

## Guides for this firmware

- [MT6580 Firmware Guide: Flashing Tools and Safety](https://www.filefirmware.com/blog/mt6580-firmware-guide-flashing-tools-and-safety): The MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- [Huawei Firmware Guide: Finding and Flashing Stock ROMs](https://www.filefirmware.com/blog/huawei-firmware-guide-finding-and-flashing-stock-roms): To reflash or unbrick a Huawei device, you must identify the exact model number and chipset to find the compatible stock ROM. Depending on the hardware, you will typically use tools like SP Flash…
- [SP Flash Tool: Download Only vs Format All + Download](https://www.filefirmware.com/blog/sp-flash-tool-download-only-vs-format-all-download): SP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…

## Frequently asked questions

### Is Huawei A6S Clone free to download?

Yes, Huawei A6S Clone can be downloaded free of charge from its web page.

### How large is the download?

The Huawei A6S Clone package is 721 MB.

### Which tool do I need to flash Huawei A6S Clone?

Huawei A6S Clone is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

### What Android version is Huawei A6S Clone?

This firmware is Android 8.1 (Oreo), built on January 25, 2019.

### Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

## More Huawei files

- [Huawei Y9 Prime STK-L22](https://www.filefirmware.com/file/huawei-y9-prime-stk-l22-100996) — 1 GB
- [Huawei Y9 Prime STK-L22HN](https://www.filefirmware.com/file/huawei-y9-prime-stk-l22hn-100985) — 3.31 GB
- [Huawei Y9 Prime STK-LX1](https://www.filefirmware.com/file/huawei-y9-prime-stk-lx1-100983) — 2.95 GB
- [Huawei Y9 Prime Stark-L21](https://www.filefirmware.com/file/huawei-y9-prime-stark-l21-100982) — 2.95 GB
- [Huawei Y9 Prime STK-LX2](https://www.filefirmware.com/file/huawei-y9-prime-stk-lx2-100981) — 1 GB
- [Huawei Y9 Prime Stark-L22B](https://www.filefirmware.com/file/huawei-y9-prime-stark-l22b-100978) — 3.54 GB
- [Huawei Y9 Prime STK-L21](https://www.filefirmware.com/file/huawei-y9-prime-stk-l21-100977) — 2.95 GB
- [Huawei Y9 Jackman-L22](https://www.filefirmware.com/file/huawei-y9-jackman-l22-100976) — 3.32 GB

---

*Source: File Firmware — <https://www.filefirmware.com/file/huawei-a6s-clone-99446>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
