Archos 101C neon
Archos 101C neon is a Archos firmware file listed under Archos, distributed as Archos_101C_Neon_MT8127_20141105.zip with a download size of 433 MB. It is built for the MediaTek MT8127 chipset, with a firmware build date of November 05, 2014. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 4 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Archos 101C neon
The Archos 101C neon runs on Archos's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Archos 101C neon back to square one. File Name: Archos_101C_Neon_MT8127_20141105.zip File Size: 433 MB Back up your files, charge the Archos 101C neon past 50 percent, install the matching drivers, and only then begin. After flashing, allow a few minutes for the first boot. From there the Archos 101C neon should run like a brand new unit.
File Details
| File name | Archos 101C neon |
|---|---|
| Package | Archos_101C_Neon_MT8127_20141105.zip |
| Brand / Platform | Archos |
| Category | Archos |
| Chipset | MediaTek MT8127 |
| Build date | November 05, 2014 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 433 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Archos 101C neon with SP Flash Tool
- Confirm Archos 101C neon matches your exact device model and that the phone uses the MT8127 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (433 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Archos 101C neon free to download?
Yes, Archos 101C neon can be downloaded free of charge from this page.
How large is the download?
The Archos 101C neon package is 433 MB.
Which tool do I need to flash Archos 101C neon?
Archos 101C neon is MediaTek MT8127 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Archos devices. Always confirm it matches your specific model before flashing.