Apro

Apro Nano R4 N Stock Firmware

Apro_Nano_R4_n_MT6580_20180802_5.1.zip
June 16, 2026 Apro 603 MB Apro

Apro Nano R4 N Stock Firmware is a Apro firmware file listed under Apro, distributed as Apro_Nano_R4_n_MT6580_20180802_5.1.zip with a download size of 603 MB. It is built for the MediaTek MT6580 chipset and runs Android 5.1 (Lollipop), with a firmware build date of August 02, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 7 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
603 MB
Download Free

About Apro Nano R4 N Stock Firmware

Here you will find all the latest Apro firmware for Apro Nano R4 N. If you are looking for Apro Nano R4 N stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Apro Nano R4 N, if it is not, then flashing the below stock firmware can brick your device. The Apro Nano R4 N firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Apro Nano R4 N Firmware File Name : Apro_Nano_R4_n_MT6580_20180802_5.1.zip File Size : 603 MB Get Firmware Also: Apro S1 Stock Firmware How To Flash Apro Nano R4 N Stock Firmware Download and extract the Apro Nano R4 N firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Apro Nano R4 N firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Apro Nano R4 N device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Apro Nano R4 N device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U

File Details

File nameApro Nano R4 N Stock Firmware
PackageApro_Nano_R4_n_MT6580_20180802_5.1.zip
Brand / PlatformApro
CategoryApro
ChipsetMediaTek MT6580
Android versionAndroid 5.1 (Lollipop)
Build dateAugust 02, 2018
Flash toolSP Flash Tool
Package formatZIP archive
File size603 MB
Date addedJune 16, 2026
PriceFree

How to flash Apro Nano R4 N Stock Firmware with SP Flash Tool

  1. Confirm Apro Nano R4 N Stock Firmware matches your exact device model and that the phone uses the MT6580 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (603 MB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Apro Nano R4 N Stock Firmware free to download?

Yes, Apro Nano R4 N Stock Firmware can be downloaded free of charge from this page.

How large is the download?

The Apro Nano R4 N Stock Firmware package is 603 MB.

Which tool do I need to flash Apro Nano R4 N Stock Firmware?

Apro Nano R4 N Stock Firmware is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

What Android version is Apro Nano R4 N Stock Firmware?

This firmware is Android 5.1 (Lollipop), built on August 02, 2018.

Which devices is this firmware for?

This file is intended for Apro devices. Always confirm it matches your specific model before flashing.

More Apro files

Back to Apro