Apro Nano R3 Stock Firmware
Apro Nano R3 Stock Firmware is a Apro firmware file listed under Apro, distributed as Apro_Nano_R3_MT6580_20180719_5.1.zip with a download size of 454 MB. It is built for the MediaTek MT6580 chipset and runs Android 5.1 (Lollipop), with a firmware build date of July 19, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 6 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Apro Nano R3 Stock Firmware
Here you will find all the latest Apro firmware for Apro Nano R3. If you are looking for Apro Nano R3 stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Apro Nano R3, if it is not, then flashing the below stock firmware can brick your device. The Apro Nano R3 firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Apro Nano R3 Firmware File Name : Apro_Nano_R3_MT6580_20180719_5.1.zip File Size : 454 MB Get Firmware File Name : Apro_Nano_R3_MT6580_20180726_5.1.zip File Size : 445 MB Get Firmware Also: Apro Air A1 Stock Firmware How To Flash Apro Nano R3 Stock Firmware Download and extract the Apro Nano R3 firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Apro Nano R3 firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Apro Nano R3 device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Apro Nano R3 device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U
File Details
| File name | Apro Nano R3 Stock Firmware |
|---|---|
| Package | Apro_Nano_R3_MT6580_20180719_5.1.zip |
| Brand / Platform | Apro |
| Category | Apro |
| Chipset | MediaTek MT6580 |
| Android version | Android 5.1 (Lollipop) |
| Build date | July 19, 2018 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 454 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Apro Nano R3 Stock Firmware with SP Flash Tool
- Confirm Apro Nano R3 Stock Firmware matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (454 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Apro Nano R3 Stock Firmware free to download?
Yes, Apro Nano R3 Stock Firmware can be downloaded free of charge from this page.
How large is the download?
The Apro Nano R3 Stock Firmware package is 454 MB.
Which tool do I need to flash Apro Nano R3 Stock Firmware?
Apro Nano R3 Stock Firmware is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Apro Nano R3 Stock Firmware?
This firmware is Android 5.1 (Lollipop), built on July 19, 2018.
Which devices is this firmware for?
This file is intended for Apro devices. Always confirm it matches your specific model before flashing.