AGMobile Zone
AGMobile Zone is a AGMobile firmware file listed under AGmobile, distributed as AG_Zone_MT6572_07042016_5.1.zip with a download size of 592 MB. It is built for the MediaTek MT6572 chipset and runs Android 5.1 (Lollipop), with a firmware build date of April 07, 2016. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 10 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About AGMobile Zone
If your AGMobile Zone has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full AGMobile flash package along with the details to check before you begin. It can rescue a bricked handset, fix IMEI or baseband errors, and give the AGMobile Zone a fresh start without the clutter that builds up over time. File Name: AG_Zone_MT6572_07042016_5.1.zip File Size: 592 MB Back up your files, charge the AGMobile Zone past 50 percent, install the matching drivers, and only then begin. With the stock ROM back in place, the AGMobile Zone returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | AGMobile Zone |
|---|---|
| Package | AG_Zone_MT6572_07042016_5.1.zip |
| Brand / Platform | AGMobile |
| Category | AGmobile |
| Chipset | MediaTek MT6572 |
| Android version | Android 5.1 (Lollipop) |
| Build date | April 07, 2016 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 592 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash AGMobile Zone with SP Flash Tool
- Confirm AGMobile Zone matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (592 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is AGMobile Zone free to download?
Yes, AGMobile Zone can be downloaded free of charge from this page.
How large is the download?
The AGMobile Zone package is 592 MB.
Which tool do I need to flash AGMobile Zone?
AGMobile Zone is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is AGMobile Zone?
This firmware is Android 5.1 (Lollipop), built on April 07, 2016.
Which devices is this firmware for?
This file is intended for AGMobile devices. Always confirm it matches your specific model before flashing.