5Star F50
5Star F50 is a 5Star firmware file listed under 5Star, distributed as 5Star_F50_MT6572_4.4.2_MP.V1.0.zip with a download size of 333 MB. It is built for the MediaTek MT6572 chipset and runs Android 4.4 (KitKat). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 12 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About 5Star F50
The 5Star F50 runs on 5Star's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It can rescue a bricked handset, fix IMEI or baseband errors, and give the 5Star F50 a fresh start without the clutter that builds up over time. File Name: 5Star_F50_MT6572_4.4.2_MP.V1.0.zip File Size: 333 MB Back up your files, charge the 5Star F50 past 50 percent, install the matching drivers, and only then begin. After flashing, allow a few minutes for the first boot. From there the 5Star F50 should run like a brand new unit.
File Details
| File name | 5Star F50 |
|---|---|
| Package | 5Star_F50_MT6572_4.4.2_MP.V1.0.zip |
| Brand / Platform | 5Star |
| Category | 5Star |
| Chipset | MediaTek MT6572 |
| Android version | Android 4.4 (KitKat) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 333 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash 5Star F50 with SP Flash Tool
- Confirm 5Star F50 matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (333 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is 5Star F50 free to download?
Yes, 5Star F50 can be downloaded free of charge from this page.
How large is the download?
The 5Star F50 package is 333 MB.
Which tool do I need to flash 5Star F50?
5Star F50 is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is 5Star F50?
This firmware is Android 4.4 (KitKat).
Which devices is this firmware for?
This file is intended for 5Star devices. Always confirm it matches your specific model before flashing.