Uniscope S989 Stock Firmware
Uniscope S989 Stock Firmware is a Uniscope firmware file listed under Uniscope, distributed as Uniscope_S989_20130627_QFIL.zip with a download size of 158 MB. It was published on June 16, 2026. This page has been viewed 3 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Uniscope S989 Stock Firmware
Here you will find all the latest Uniscope firmware for Uniscope S989. If you are looking for Uniscope S989 stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Uniscope S989, if it is not, then flashing the below stock firmware can brick your device. The Uniscope S989 firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Uniscope S989 Firmware File Name : Uniscope_S989_20130627_QFIL.zip File Size : 158 MB Get Firmware Also: Uniscope U1201 Stock Firmware How To Flash Uniscope S989 Stock Firmware Download and extract the Uniscope S989 firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Uniscope S989 firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Uniscope S989 device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Uniscope S989 device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U
File Details
| File name | Uniscope S989 Stock Firmware |
|---|---|
| Package | Uniscope_S989_20130627_QFIL.zip |
| Brand / Platform | Uniscope |
| Category | Uniscope |
| File size | 158 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to use this file
- Confirm Uniscope S989 Stock Firmware matches your exact device model and that it is intended for Uniscope hardware.
- Back up your personal data, as flashing firmware can erase the device.
- Download the file (158 MB) using the button above.
- Use the appropriate flashing tool for your platform and follow the on-screen steps.
- Keep the device charged and connected until the process completes.
Frequently asked questions
Is Uniscope S989 Stock Firmware free to download?
Yes, Uniscope S989 Stock Firmware can be downloaded free of charge from this page.
How large is the download?
The Uniscope S989 Stock Firmware package is 158 MB.
Which devices is this firmware for?
This file is intended for Uniscope devices. Always confirm it matches your specific model before flashing.