Pulid S6 One Max Stock Firmware
Pulid S6 One Max Stock Firmware is a Pulid firmware file listed under Pulid, distributed as Pulid_S6_One_Max_MT6589_20130925_4.2.1.zip with a download size of 521 MB. It was published on June 16, 2026. This page has been viewed 2 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Pulid S6 One Max Stock Firmware
Here you will find all the latest Pulid firmware for Pulid S6 One Max. If you are looking for Pulid S6 One Max stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Pulid S6 One Max, if it is not, then flashing the below stock firmware can brick your device. The Pulid S6 One Max firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Pulid S6 One Max Firmware File Name : Pulid_S6_One_Max_MT6589_20130925_4.2.1.zip File Size : 521 MB Android OS Version : 4.2.1 Get Firmware How To Flash Pulid S6 One Max Stock Firmware Download and extract the Pulid S6 One Max firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Pulid S6 One Max firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Pulid S6 One Max device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Pulid S6 One Max device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U
File Details
| File name | Pulid S6 One Max Stock Firmware |
|---|---|
| Package | Pulid_S6_One_Max_MT6589_20130925_4.2.1.zip |
| Brand / Platform | Pulid |
| Category | Pulid |
| File size | 521 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to use this file
- Confirm Pulid S6 One Max Stock Firmware matches your exact device model and that it is intended for Pulid hardware.
- Back up your personal data, as flashing firmware can erase the device.
- Download the file (521 MB) using the button above.
- Use the appropriate flashing tool for your platform and follow the on-screen steps.
- Keep the device charged and connected until the process completes.
Frequently asked questions
Is Pulid S6 One Max Stock Firmware free to download?
Yes, Pulid S6 One Max Stock Firmware can be downloaded free of charge from this page.
How large is the download?
The Pulid S6 One Max Stock Firmware package is 521 MB.
Which devices is this firmware for?
This file is intended for Pulid devices. Always confirm it matches your specific model before flashing.