Micromax

Micromax X458 Stock Firmware

Micromax_X458_MT6260_V11_11122014_MIRA.zip
June 16, 2026 Micromax 7 MB Micromax

Micromax X458 Stock Firmware is a Micromax firmware file listed under Micromax, distributed as Micromax_X458_MT6260_V11_11122014_MIRA.zip with a download size of 7 MB. It is built for the MediaTek MT6260 chipset, with a firmware build date of December 11, 2014. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 17 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
7 MB
Download Free

About Micromax X458 Stock Firmware

Here you will find all the latest Micromax firmware for Micromax X458. If you are looking for Micromax X458 stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Micromax X458, if it is not, then flashing the below stock firmware can brick your device. The Micromax X458 firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Micromax X458 Firmware File Name : Micromax_X458_MT6260_V11_11122014_MIRA.zip File Size : 7 MB Get Firmware Also: Micromax X096 Stock Firmware How To Flash Micromax X458 Stock Firmware Download and extract the Micromax X458 firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Micromax X458 firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Micromax X458 device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Micromax X458 device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U

File Details

File nameMicromax X458 Stock Firmware
PackageMicromax_X458_MT6260_V11_11122014_MIRA.zip
Brand / PlatformMicromax
CategoryMicromax
ChipsetMediaTek MT6260
Build dateDecember 11, 2014
Flash toolSP Flash Tool
Package formatZIP archive
File size7 MB
Date addedJune 16, 2026
PriceFree

How to flash Micromax X458 Stock Firmware with SP Flash Tool

  1. Confirm Micromax X458 Stock Firmware matches your exact device model and that the phone uses the MT6260 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (7 MB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Micromax X458 Stock Firmware free to download?

Yes, Micromax X458 Stock Firmware can be downloaded free of charge from this page.

How large is the download?

The Micromax X458 Stock Firmware package is 7 MB.

Which tool do I need to flash Micromax X458 Stock Firmware?

Micromax X458 Stock Firmware is MediaTek MT6260 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Micromax devices. Always confirm it matches your specific model before flashing.

More Micromax files

Back to Micromax