Rage Melody Stock Firmware

About Rage Melody Stock Firmware

Here you will find all the latest Rage firmware for Rage Melody. If you are looking for Rage Melody stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Rage Melody, if it is not, then flashing the below stock firmware can brick your device. The Rage Melody firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Rage Melody Firmware File Name : Rage_Melody_MT6572_V04_05012015.zip File Size : 593 MB Get Firmware Also: Rage OctaOne 5.0 Stock Firmware How To Flash Rage Melody Stock Firmware Download and extract the Rage Melody firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Rage Melody firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Rage Melody device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Rage Melody device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U

File Details

How to flash Rage Melody Stock Firmware with SP Flash Tool

1. Confirm Rage Melody Stock Firmware matches your exact device model and that the phone uses the MT6572 chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (593 MB) using the button above and extract it on a Windows PC.
4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Guides for this firmware

• MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
• Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
• What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…

Frequently asked questions

Is Rage Melody Stock Firmware free to download?

Yes, Rage Melody Stock Firmware can be downloaded free of charge from this page.

How large is the download?

The Rage Melody Stock Firmware package is 593 MB.

Which tool do I need to flash Rage Melody Stock Firmware?

Rage Melody Stock Firmware is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Rage devices. Always confirm it matches your specific model before flashing.