Rage OctaOne 5.0 Stock Firmware
Rage OctaOne 5.0 Stock Firmware is a Rage firmware file listed under Rage, distributed as Rage_OctaOne_5.0_MT6592_V5.0_20150429.zip with a download size of 549 MB. It is built for the MediaTek MT6592 chipset and runs Android 5.0 (Lollipop), with a firmware build date of April 29, 2015. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 4 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Rage OctaOne 5.0 Stock Firmware
Here you will find all the latest Rage firmware for Rage OctaOne 5.0. If you are looking for Rage OctaOne 5.0 stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Rage OctaOne 5.0, if it is not, then flashing the below stock firmware can brick your device. The Rage OctaOne 5.0 firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Rage OctaOne 5.0 Firmware File Name : Rage_OctaOne_5.0_MT6592_V5.0_20150429.zip File Size : 549 MB Get Firmware Also: Rage Ops 51D Stock Firmware How To Flash Rage OctaOne 5.0 Stock Firmware Download and extract the Rage OctaOne 5.0 firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Rage OctaOne 5.0 firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Rage OctaOne 5.0 device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Rage OctaOne 5.0 device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U
File Details
| File name | Rage OctaOne 5.0 Stock Firmware |
|---|---|
| Package | Rage_OctaOne_5.0_MT6592_V5.0_20150429.zip |
| Brand / Platform | Rage |
| Category | Rage |
| Chipset | MediaTek MT6592 |
| Android version | Android 5.0 (Lollipop) |
| Build date | April 29, 2015 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 549 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Rage OctaOne 5.0 Stock Firmware with SP Flash Tool
- Confirm Rage OctaOne 5.0 Stock Firmware matches your exact device model and that the phone uses the MT6592 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (549 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Rage OctaOne 5.0 Stock Firmware free to download?
Yes, Rage OctaOne 5.0 Stock Firmware can be downloaded free of charge from this page.
How large is the download?
The Rage OctaOne 5.0 Stock Firmware package is 549 MB.
Which tool do I need to flash Rage OctaOne 5.0 Stock Firmware?
Rage OctaOne 5.0 Stock Firmware is MediaTek MT6592 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Rage OctaOne 5.0 Stock Firmware?
This firmware is Android 5.0 (Lollipop), built on April 29, 2015.
Which devices is this firmware for?
This file is intended for Rage devices. Always confirm it matches your specific model before flashing.