Swipe Elite 1 Stock Firmware

About Swipe Elite 1 Stock Firmware

Here you will find all the latest Swipe firmware for Swipe Elite 1. If you are looking for Swipe Elite 1 stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Swipe Elite 1, if it is not, then flashing the below stock firmware can brick your device. The Swipe Elite 1 firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Swipe Elite 1 Firmware File Name : Swipe_Elite_1_V1.5_08292016_SPD.zip File Size : 747 MB Get Firmware Also: Swipe Konnect Power Stock Firmware How To Flash Swipe Elite 1 Stock Firmware Download and extract the Swipe Elite 1 firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Swipe Elite 1 firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Swipe Elite 1 device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Swipe Elite 1 device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U

File Details

How to flash Swipe Elite 1 Stock Firmware with SPD ResearchDownload

1. Confirm Swipe Elite 1 Stock Firmware matches your exact device model and that it is intended for Swipe hardware.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (747 MB) using the button above and extract it on a Windows PC.
4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
5. In the tool, load the .pac firmware file from the extracted folder.
6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Guides for this firmware

• Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
• How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…

Frequently asked questions

Is Swipe Elite 1 Stock Firmware free to download?

Yes, Swipe Elite 1 Stock Firmware can be downloaded free of charge from this page.

How large is the download?

The Swipe Elite 1 Stock Firmware package is 747 MB.

Which tool do I need to flash Swipe Elite 1 Stock Firmware?

Swipe Elite 1 Stock Firmware is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Swipe devices. Always confirm it matches your specific model before flashing.