Swipe Elite Envy Stock Firmware
Swipe Elite Envy Stock Firmware is a Swipe firmware file listed under Swipe, distributed as Swipe_Elite_Envy_MSM8909_20180308_6.0.zip with a download size of 1 GB. It is built for the Qualcomm MSM8909 chipset and runs Android 6.0 (Marshmallow), with a firmware build date of March 08, 2018. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 9 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Swipe Elite Envy Stock Firmware
Here you will find all the latest Swipe firmware for Swipe Elite Envy. If you are looking for Swipe Elite Envy stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Swipe Elite Envy, if it is not, then flashing the below stock firmware can brick your device. The Swipe Elite Envy firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Swipe Elite Envy Firmware File Name : Swipe_Elite_Envy_MSM8909_20180308_6.0.zip File Size : 1 GB Android OS Version : 6.0 Get Firmware Also: Swipe Razor Stock Firmware How To Flash Swipe Elite Envy Stock Firmware Download and extract the Swipe Elite Envy firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Swipe Elite Envy firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Swipe Elite Envy device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Swipe Elite Envy device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U
File Details
| File name | Swipe Elite Envy Stock Firmware |
|---|---|
| Package | Swipe_Elite_Envy_MSM8909_20180308_6.0.zip |
| Brand / Platform | Swipe |
| Category | Swipe |
| Chipset | Qualcomm MSM8909 |
| Android version | Android 6.0 (Marshmallow) |
| Build date | March 08, 2018 |
| Flash tool | QFIL (part of Qualcomm QPST) |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Swipe Elite Envy Stock Firmware with QFIL
- Confirm Swipe Elite Envy Stock Firmware matches your exact device model and that the phone uses the MSM8909 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
- In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
- Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
- Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.
Guides for this firmware
- How to Fix QFIL Sahara Fail ErrorThe Sahara Fail error in QFIL occurs when the initial communication between the computer and the Qualcomm device fails. This prevents the tool from uploading the Firehose programmer, which is…
- How to Use QFIL: Qualcomm Firmware Flashing GuideQFIL (Qualcomm Flash Image Loader) is a specialized software tool used to flash stock firmware onto devices powered by Qualcomm chipsets. It is part of the Qualcomm QPST (Qualcomm Product Support…
Frequently asked questions
Is Swipe Elite Envy Stock Firmware free to download?
Yes, Swipe Elite Envy Stock Firmware can be downloaded free of charge from this page.
How large is the download?
The Swipe Elite Envy Stock Firmware package is 1 GB.
Which tool do I need to flash Swipe Elite Envy Stock Firmware?
Swipe Elite Envy Stock Firmware is Qualcomm MSM8909 firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.
What Android version is Swipe Elite Envy Stock Firmware?
This firmware is Android 6.0 (Marshmallow), built on March 08, 2018.
Which devices is this firmware for?
This file is intended for Swipe devices. Always confirm it matches your specific model before flashing.