Haier Zio P2 Stock Firmware
Haier Zio P2 Stock Firmware is a Haier firmware file listed under Haier, distributed as Haier_Zio_P2_MT6572_V1_25042014.zip with a download size of 409 MB. It was published on June 16, 2026. This page has been viewed 2 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Haier Zio P2 Stock Firmware
Here you will find all the latest Haier firmware for Haier Zio P2. If you are looking for Haier Zio P2 stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Haier Zio P2, if it is not, then flashing the below stock firmware can brick your device. The Haier Zio P2 firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Haier Zio P2 Firmware File Name : Haier_Zio_P2_MT6572_V1_25042014.zip File Size : 409 MB Get Firmware File Name : Haier_Zio_P2_MT6572_V2_25042014.zip File Size : 409 MB Get Firmware Also: Haier G7 Stock Firmware How To Flash Haier Zio P2 Stock Firmware Download and extract the Haier Zio P2 firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Haier Zio P2 firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Haier Zio P2 device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Haier Zio P2 device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U
File Details
| File name | Haier Zio P2 Stock Firmware |
|---|---|
| Package | Haier_Zio_P2_MT6572_V1_25042014.zip |
| Brand / Platform | Haier |
| Category | Haier |
| File size | 409 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to use this file
- Confirm Haier Zio P2 Stock Firmware matches your exact device model and that it is intended for Haier hardware.
- Back up your personal data, as flashing firmware can erase the device.
- Download the file (409 MB) using the button above.
- Use the appropriate flashing tool for your platform and follow the on-screen steps.
- Keep the device charged and connected until the process completes.
Frequently asked questions
Is Haier Zio P2 Stock Firmware free to download?
Yes, Haier Zio P2 Stock Firmware can be downloaded free of charge from this page.
How large is the download?
The Haier Zio P2 Stock Firmware package is 409 MB.
Which devices is this firmware for?
This file is intended for Haier devices. Always confirm it matches your specific model before flashing.