ZTE

ZTE Z6201V

ZTE_Z6201V_MT6761_374870B1612Z6201VV1.0.0B06.zip
June 16, 2026 ZTE 1 GB ZTE

ZTE Z6201V is a ZTE firmware file listed under ZTE, distributed as ZTE_Z6201V_MT6761_374870B1612Z6201VV1.0.0B06.zip with a download size of 1 GB. It is built for the MediaTek MT6761 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 47 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1 GB
Download Free

About ZTE Z6201V

Looking for the official stock firmware for your ZTE Z6201V? You're in the right place. Below is the original ZTE flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It can rescue a bricked handset, fix IMEI or baseband errors, and give the ZTE Z6201V a fresh start without the clutter that builds up over time. File Name: ZTE_Z6201V_MT6761_374870B1612Z6201VV1.0.0B06.zip File Size: 1 GB Back up your files, charge the ZTE Z6201V past 50 percent, install the matching drivers, and only then begin. With the stock ROM back in place, the ZTE Z6201V returns to factory state. If something fails, verify the file matches your model and retry.

File Details

File nameZTE Z6201V
PackageZTE_Z6201V_MT6761_374870B1612Z6201VV1.0.0B06.zip
Brand / PlatformZTE
CategoryZTE
ChipsetMediaTek MT6761
Flash toolSP Flash Tool
Package formatZIP archive
File size1 GB
Date addedJune 16, 2026
PriceFree

How to flash ZTE Z6201V with SP Flash Tool

  1. Confirm ZTE Z6201V matches your exact device model and that the phone uses the MT6761 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1 GB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is ZTE Z6201V free to download?

Yes, ZTE Z6201V can be downloaded free of charge from this page.

How large is the download?

The ZTE Z6201V package is 1 GB.

Which tool do I need to flash ZTE Z6201V?

ZTE Z6201V is MediaTek MT6761 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for ZTE devices. Always confirm it matches your specific model before flashing.

More ZTE files

Back to ZTE