ZTE U879
ZTE U879 is a ZTE firmware file listed under ZTE, distributed as ZTE_U879_MT6572_03092014.zip with a download size of 329 MB. It is built for the MediaTek MT6572 chipset, with a firmware build date of September 03, 2014. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 51 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About ZTE U879
Sometimes a clean firmware install is the best fix for a misbehaving phone. For ZTE U879 owners, this page hosts the original ZTE stock ROM and the key file details. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the ZTE U879 back to square one. File Name: ZTE_U879_MT6572_03092014.zip File Size: 329 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. Once installed, your ZTE U879 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | ZTE U879 |
|---|---|
| Package | ZTE_U879_MT6572_03092014.zip |
| Brand / Platform | ZTE |
| Category | ZTE |
| Chipset | MediaTek MT6572 |
| Build date | September 03, 2014 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 329 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash ZTE U879 with SP Flash Tool
- Confirm ZTE U879 matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (329 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is ZTE U879 free to download?
Yes, ZTE U879 can be downloaded free of charge from this page.
How large is the download?
The ZTE U879 package is 329 MB.
Which tool do I need to flash ZTE U879?
ZTE U879 is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for ZTE devices. Always confirm it matches your specific model before flashing.