ZTE T520 MY
ZTE T520 MY is a ZTE firmware file listed under ZTE, distributed as ZTE_Blade_L5_T520_MY_MT6572_20170206_5.1.ZIP with a download size of 783 MB. It is built for the MediaTek MT6572 chipset and runs Android 5.1 (Lollipop), with a firmware build date of February 06, 2017. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 47 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About ZTE T520 MY
Looking for the official stock firmware for your ZTE T520 MY? You're in the right place. Below is the original ZTE flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It can rescue a bricked handset, fix IMEI or baseband errors, and give the ZTE T520 MY a fresh start without the clutter that builds up over time. File Name: ZTE_Blade_L5_T520_MY_MT6572_20170206_5.1.ZIP File Size: 783 MB Back up your files, charge the ZTE T520 MY past 50 percent, install the matching drivers, and only then begin. When it finishes, the ZTE T520 MY restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | ZTE T520 MY |
|---|---|
| Package | ZTE_Blade_L5_T520_MY_MT6572_20170206_5.1.ZIP |
| Brand / Platform | ZTE |
| Category | ZTE |
| Chipset | MediaTek MT6572 |
| Android version | Android 5.1 (Lollipop) |
| Build date | February 06, 2017 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 783 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash ZTE T520 MY with SP Flash Tool
- Confirm ZTE T520 MY matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (783 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is ZTE T520 MY free to download?
Yes, ZTE T520 MY can be downloaded free of charge from this page.
How large is the download?
The ZTE T520 MY package is 783 MB.
Which tool do I need to flash ZTE T520 MY?
ZTE T520 MY is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is ZTE T520 MY?
This firmware is Android 5.1 (Lollipop), built on February 06, 2017.
Which devices is this firmware for?
This file is intended for ZTE devices. Always confirm it matches your specific model before flashing.