ZTE Blade V2020
ZTE Blade V2020 is a ZTE firmware file listed under ZTE, distributed as ZTE_Blade_V2020_8010_RU_Russia_396790B0980GEN_RU_8010RU_V1.1_GEN_RU_P963F05V1.0.0B09_DL_SPD.zip with a download size of 3 GB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 40 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About ZTE Blade V2020
Sometimes a clean firmware install is the best fix for a misbehaving phone. For ZTE Blade V2020 owners, this page hosts the original ZTE stock ROM and the key file details. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: ZTE_Blade_V2020_8010_RU_Russia_396790B0980GEN_RU_8010RU_V1.1_GEN_RU_P963F05V1.0.0B09_DL_SPD.zip File Size: 3 GB Back up your files, charge the ZTE Blade V2020 past 50 percent, install the matching drivers, and only then begin. Once installed, your ZTE Blade V2020 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | ZTE Blade V2020 |
|---|---|
| Package | ZTE_Blade_V2020_8010_RU_Russia_396790B0980GEN_RU_8010RU_V1.1_GEN_RU_P963F05V1.0.0B09_DL_SPD.zip |
| Brand / Platform | ZTE |
| Category | ZTE |
| Platform | Unisoc (Spreadtrum) |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 3 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash ZTE Blade V2020 with SPD ResearchDownload
- Confirm ZTE Blade V2020 matches your exact device model and that it is intended for ZTE hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (3 GB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is ZTE Blade V2020 free to download?
Yes, ZTE Blade V2020 can be downloaded free of charge from this page.
How large is the download?
The ZTE Blade V2020 package is 3 GB.
Which tool do I need to flash ZTE Blade V2020?
ZTE Blade V2020 is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for ZTE devices. Always confirm it matches your specific model before flashing.