ZTE Blade T2 Z559DL
ZTE Blade T2 Z559DL is a ZTE firmware file listed under ZTE, distributed as ZTE_Blade_T2_Z559DL_GABBV1.0.0B07_DL_QFIL.zip with a download size of 740 MB. It is built for Qualcomm-based devices. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 26 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About ZTE Blade T2 Z559DL
If your ZTE Blade T2 Z559DL has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full ZTE flash package along with the details to check before you begin. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the ZTE Blade T2 Z559DL back to square one. File Name: ZTE_Blade_T2_Z559DL_GABBV1.0.0B07_DL_QFIL.zip File Size: 740 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. Once installed, your ZTE Blade T2 Z559DL should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | ZTE Blade T2 Z559DL |
|---|---|
| Package | ZTE_Blade_T2_Z559DL_GABBV1.0.0B07_DL_QFIL.zip |
| Brand / Platform | ZTE |
| Category | ZTE |
| Platform | Qualcomm |
| Flash tool | QFIL (part of Qualcomm QPST) |
| Package format | ZIP archive |
| File size | 740 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash ZTE Blade T2 Z559DL with QFIL
- Confirm ZTE Blade T2 Z559DL matches your exact device model and that it is intended for ZTE hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (740 MB) using the button above and extract it on a Windows PC.
- Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
- In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
- Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
- Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.
Guides for this firmware
- How to Get Qualcomm Phones into EDL Mode for QFILTo get a Qualcomm-based phone into EDL (Emergency Download) mode for QFIL, you must trigger a specific boot state that allows the device to be recognized by your PC as a "Qualcomm HS-USB QDLoader…
- How to Fix QFIL Sahara Fail ErrorThe Sahara Fail error in QFIL occurs when the initial communication between the computer and the Qualcomm device fails. This prevents the tool from uploading the Firehose programmer, which is…
- How to Use QFIL: Qualcomm Firmware Flashing GuideQFIL (Qualcomm Flash Image Loader) is a specialized software tool used to flash stock firmware onto devices powered by Qualcomm chipsets. It is part of the Qualcomm QPST (Qualcomm Product Support…
Frequently asked questions
Is ZTE Blade T2 Z559DL free to download?
Yes, ZTE Blade T2 Z559DL can be downloaded free of charge from this page.
How large is the download?
The ZTE Blade T2 Z559DL package is 740 MB.
Which tool do I need to flash ZTE Blade T2 Z559DL?
ZTE Blade T2 Z559DL is Qualcomm firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.
Which devices is this firmware for?
This file is intended for ZTE devices. Always confirm it matches your specific model before flashing.