ZTE Blade L130
ZTE Blade L130 is a ZTE firmware file listed under ZTE, distributed as ZTE_Blade_L130_Telcel_Mexico_P731F30_V1.0.0_B09_SPD.zip with a download size of 844 MB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 31 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About ZTE Blade L130
The ZTE Blade L130 runs on ZTE's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the ZTE Blade L130 back to square one. File Name: ZTE_Blade_L130_Telcel_Mexico_P731F30_V1.0.0_B09_SPD.zip File Size: 844 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. With the stock ROM back in place, the ZTE Blade L130 returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | ZTE Blade L130 |
|---|---|
| Package | ZTE_Blade_L130_Telcel_Mexico_P731F30_V1.0.0_B09_SPD.zip |
| Brand / Platform | ZTE |
| Category | ZTE |
| Platform | Unisoc (Spreadtrum) |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 844 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash ZTE Blade L130 with SPD ResearchDownload
- Confirm ZTE Blade L130 matches your exact device model and that it is intended for ZTE hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (844 MB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is ZTE Blade L130 free to download?
Yes, ZTE Blade L130 can be downloaded free of charge from this page.
How large is the download?
The ZTE Blade L130 package is 844 MB.
Which tool do I need to flash ZTE Blade L130?
ZTE Blade L130 is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for ZTE devices. Always confirm it matches your specific model before flashing.