ZTE Blade L130 Bolivia
ZTE Blade L130 Bolivia is a ZTE firmware file listed under ZTE, distributed as ZTE_Blade_L130_Bolivia_374090B0100GEN_BO_P731F30V1.0.0B01_DL_SPD.zip with a download size of 830 MB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 30 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About ZTE Blade L130 Bolivia
Looking for the official stock firmware for your ZTE Blade L130 Bolivia? You're in the right place. Below is the original ZTE flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the ZTE Blade L130 Bolivia to factory condition. File Name: ZTE_Blade_L130_Bolivia_374090B0100GEN_BO_P731F30V1.0.0B01_DL_SPD.zip File Size: 830 MB Back up your files, charge the ZTE Blade L130 Bolivia past 50 percent, install the matching drivers, and only then begin. After flashing, allow a few minutes for the first boot. From there the ZTE Blade L130 Bolivia should run like a brand new unit.
File Details
| File name | ZTE Blade L130 Bolivia |
|---|---|
| Package | ZTE_Blade_L130_Bolivia_374090B0100GEN_BO_P731F30V1.0.0B01_DL_SPD.zip |
| Brand / Platform | ZTE |
| Category | ZTE |
| Platform | Unisoc (Spreadtrum) |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 830 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash ZTE Blade L130 Bolivia with SPD ResearchDownload
- Confirm ZTE Blade L130 Bolivia matches your exact device model and that it is intended for ZTE hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (830 MB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is ZTE Blade L130 Bolivia free to download?
Yes, ZTE Blade L130 Bolivia can be downloaded free of charge from this page.
How large is the download?
The ZTE Blade L130 Bolivia package is 830 MB.
Which tool do I need to flash ZTE Blade L130 Bolivia?
ZTE Blade L130 Bolivia is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for ZTE devices. Always confirm it matches your specific model before flashing.