Vivo X80 PD2183F
Vivo X80 PD2183F is a Vivo firmware file listed under Vivo, distributed as Vivo_X80_PD2183F_MT6983_EX_A_12.0.8.13.W20.V000L1_080522.zip with a download size of 9.91 GB. It is built for the MediaTek MT6983 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 44 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Vivo X80 PD2183F
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Vivo X80 PD2183F owners, this page hosts the original Vivo stock ROM and the key file details. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Vivo_X80_PD2183F_MT6983_EX_A_12.0.8.13.W20.V000L1_080522.zip File Size: 9.91 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. With the stock ROM back in place, the Vivo X80 PD2183F returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Vivo X80 PD2183F |
|---|---|
| Package | Vivo_X80_PD2183F_MT6983_EX_A_12.0.8.13.W20.V000L1_080522.zip |
| Brand / Platform | Vivo |
| Category | Vivo |
| Chipset | MediaTek MT6983 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 9.91 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Vivo X80 PD2183F with SP Flash Tool
- Confirm Vivo X80 PD2183F matches your exact device model and that the phone uses the MT6983 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (9.91 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Vivo Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick a Vivo device, you must identify the specific chipset used by your model and use the corresponding flashing tool. By downloading the correct stock ROM and following the…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Vivo X80 PD2183F free to download?
Yes, Vivo X80 PD2183F can be downloaded free of charge from this page.
How large is the download?
The Vivo X80 PD2183F package is 9.91 GB.
Which tool do I need to flash Vivo X80 PD2183F?
Vivo X80 PD2183F is MediaTek MT6983 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Vivo devices. Always confirm it matches your specific model before flashing.