Vivo X30 Pro PD1938
Vivo X30 Pro PD1938 is a Vivo firmware file listed under Vivo, distributed as Vivo_X30_Pro_PD1938_A_1.16.7_250320_QFIL.zip with a download size of 6 GB. It is built for Qualcomm-based devices. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 46 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Vivo X30 Pro PD1938
The Vivo X30 Pro PD1938 runs on Vivo's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Vivo_X30_Pro_PD1938_A_1.16.7_250320_QFIL.zip File Size: 6 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. When it finishes, the Vivo X30 Pro PD1938 restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Vivo X30 Pro PD1938 |
|---|---|
| Package | Vivo_X30_Pro_PD1938_A_1.16.7_250320_QFIL.zip |
| Brand / Platform | Vivo |
| Category | Vivo |
| Platform | Qualcomm |
| Flash tool | QFIL (part of Qualcomm QPST) |
| Package format | ZIP archive |
| File size | 6 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Vivo X30 Pro PD1938 with QFIL
- Confirm Vivo X30 Pro PD1938 matches your exact device model and that it is intended for Vivo hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (6 GB) using the button above and extract it on a Windows PC.
- Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
- In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
- Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
- Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.
Guides for this firmware
- Vivo Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick a Vivo device, you must identify the specific chipset used by your model and use the corresponding flashing tool. By downloading the correct stock ROM and following the…
- How to Get Qualcomm Phones into EDL Mode for QFILTo get a Qualcomm-based phone into EDL (Emergency Download) mode for QFIL, you must trigger a specific boot state that allows the device to be recognized by your PC as a "Qualcomm HS-USB QDLoader…
- How to Fix QFIL Sahara Fail ErrorThe Sahara Fail error in QFIL occurs when the initial communication between the computer and the Qualcomm device fails. This prevents the tool from uploading the Firehose programmer, which is…
Frequently asked questions
Is Vivo X30 Pro PD1938 free to download?
Yes, Vivo X30 Pro PD1938 can be downloaded free of charge from this page.
How large is the download?
The Vivo X30 Pro PD1938 package is 6 GB.
Which tool do I need to flash Vivo X30 Pro PD1938?
Vivo X30 Pro PD1938 is Qualcomm firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.
Which devices is this firmware for?
This file is intended for Vivo devices. Always confirm it matches your specific model before flashing.