Vivo V1 PD1502F
Vivo V1 PD1502F is a Vivo firmware file listed under Vivo, distributed as Vivo_V1_PD1502F_EX_A_2.5.26_05052017_QFIL.zip with a download size of 3 GB. It is built for Qualcomm-based devices, with a firmware build date of May 05, 2017. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 14 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Vivo V1 PD1502F
The Vivo V1 PD1502F runs on Vivo's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Vivo V1 PD1502F a fresh start without the clutter that builds up over time. File Name: Vivo_V1_PD1502F_EX_A_2.5.26_05052017_QFIL.zip File Size: 3 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. Once installed, your Vivo V1 PD1502F should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Vivo V1 PD1502F |
|---|---|
| Package | Vivo_V1_PD1502F_EX_A_2.5.26_05052017_QFIL.zip |
| Brand / Platform | Vivo |
| Category | Vivo |
| Platform | Qualcomm |
| Build date | May 05, 2017 |
| Flash tool | QFIL (part of Qualcomm QPST) |
| Package format | ZIP archive |
| File size | 3 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Vivo V1 PD1502F with QFIL
- Confirm Vivo V1 PD1502F matches your exact device model and that it is intended for Vivo hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (3 GB) using the button above and extract it on a Windows PC.
- Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
- In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
- Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
- Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.
Guides for this firmware
- Vivo Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick a Vivo device, you must identify the specific chipset used by your model and use the corresponding flashing tool. By downloading the correct stock ROM and following the…
- How to Get Qualcomm Phones into EDL Mode for QFILTo get a Qualcomm-based phone into EDL (Emergency Download) mode for QFIL, you must trigger a specific boot state that allows the device to be recognized by your PC as a "Qualcomm HS-USB QDLoader…
- How to Fix QFIL Sahara Fail ErrorThe Sahara Fail error in QFIL occurs when the initial communication between the computer and the Qualcomm device fails. This prevents the tool from uploading the Firehose programmer, which is…
Frequently asked questions
Is Vivo V1 PD1502F free to download?
Yes, Vivo V1 PD1502F can be downloaded free of charge from this page.
How large is the download?
The Vivo V1 PD1502F package is 3 GB.
Which tool do I need to flash Vivo V1 PD1502F?
Vivo V1 PD1502F is Qualcomm firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.
Which devices is this firmware for?
This file is intended for Vivo devices. Always confirm it matches your specific model before flashing.