Vivo Nex 3 PD1924F
Vivo Nex 3 PD1924F is a Vivo firmware file listed under Vivo, distributed as Vivo_Nex_3_PD1924F_EX_A_1.8.10_25092019_QPST.zip with a download size of 5 GB. It is built for Qualcomm-based devices, with a firmware build date of September 25, 2019. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 22 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Vivo Nex 3 PD1924F
If your Vivo Nex 3 PD1924F has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Vivo flash package along with the details to check before you begin. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Vivo Nex 3 PD1924F back to square one. File Name: Vivo_Nex_3_PD1924F_EX_A_1.8.10_25092019_QPST.zip File Size: 5 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. With the stock ROM back in place, the Vivo Nex 3 PD1924F returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Vivo Nex 3 PD1924F |
|---|---|
| Package | Vivo_Nex_3_PD1924F_EX_A_1.8.10_25092019_QPST.zip |
| Brand / Platform | Vivo |
| Category | Vivo |
| Platform | Qualcomm |
| Build date | September 25, 2019 |
| Flash tool | QFIL (part of Qualcomm QPST) |
| Package format | ZIP archive |
| File size | 5 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Vivo Nex 3 PD1924F with QFIL
- Confirm Vivo Nex 3 PD1924F matches your exact device model and that it is intended for Vivo hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (5 GB) using the button above and extract it on a Windows PC.
- Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
- In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
- Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
- Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.
Guides for this firmware
- Vivo Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick a Vivo device, you must identify the specific chipset used by your model and use the corresponding flashing tool. By downloading the correct stock ROM and following the…
- How to Get Qualcomm Phones into EDL Mode for QFILTo get a Qualcomm-based phone into EDL (Emergency Download) mode for QFIL, you must trigger a specific boot state that allows the device to be recognized by your PC as a "Qualcomm HS-USB QDLoader…
- How to Fix QFIL Sahara Fail ErrorThe Sahara Fail error in QFIL occurs when the initial communication between the computer and the Qualcomm device fails. This prevents the tool from uploading the Firehose programmer, which is…
Frequently asked questions
Is Vivo Nex 3 PD1924F free to download?
Yes, Vivo Nex 3 PD1924F can be downloaded free of charge from this page.
How large is the download?
The Vivo Nex 3 PD1924F package is 5 GB.
Which tool do I need to flash Vivo Nex 3 PD1924F?
Vivo Nex 3 PD1924F is Qualcomm firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.
Which devices is this firmware for?
This file is intended for Vivo devices. Always confirm it matches your specific model before flashing.