Swipe Elite Prime
Swipe Elite Prime is a Swipe firmware file listed under Swipe, distributed as Swipe_Elite_Prime_V1.9_19092017_SPD.zip with a download size of 875 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of September 19, 2017. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 24 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Swipe Elite Prime
Looking for the official stock firmware for your Swipe Elite Prime? You're in the right place. Below is the original Swipe flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Swipe Elite Prime a fresh start without the clutter that builds up over time. File Name: Swipe_Elite_Prime_V1.9_19092017_SPD.zip File Size: 875 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. After flashing, allow a few minutes for the first boot. From there the Swipe Elite Prime should run like a brand new unit.
File Details
| File name | Swipe Elite Prime |
|---|---|
| Package | Swipe_Elite_Prime_V1.9_19092017_SPD.zip |
| Brand / Platform | Swipe |
| Category | Swipe |
| Platform | Unisoc (Spreadtrum) |
| Build date | September 19, 2017 |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 875 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Swipe Elite Prime with SPD ResearchDownload
- Confirm Swipe Elite Prime matches your exact device model and that it is intended for Swipe hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (875 MB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Swipe Elite Prime free to download?
Yes, Swipe Elite Prime can be downloaded free of charge from this page.
How large is the download?
The Swipe Elite Prime package is 875 MB.
Which tool do I need to flash Swipe Elite Prime?
Swipe Elite Prime is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Swipe devices. Always confirm it matches your specific model before flashing.