Qmobile Matrix 2
Qmobile Matrix 2 is a Qmobile firmware file listed under Qmobile, distributed as QMobile_QSmart_Hot_5_MT6763_MP_0804_180610_9.0.zip with a download size of 1.52 GB. It is built for the MediaTek MT6763 chipset and runs Android 9 (Pie). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 4 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Qmobile Matrix 2
If your Qmobile Matrix 2 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Qmobile flash package along with the details to check before you begin. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Qmobile Matrix 2 a fresh start without the clutter that builds up over time. File Name: QMobile_QSmart_Hot_5_MT6763_MP_0804_180610_9.0.zip File Size: 1.52 GB Back up your files, charge the Qmobile Matrix 2 past 50 percent, install the matching drivers, and only then begin. After flashing, allow a few minutes for the first boot. From there the Qmobile Matrix 2 should run like a brand new unit.
File Details
| File name | Qmobile Matrix 2 |
|---|---|
| Package | QMobile_QSmart_Hot_5_MT6763_MP_0804_180610_9.0.zip |
| Brand / Platform | Qmobile |
| Category | Qmobile |
| Chipset | MediaTek MT6763 |
| Android version | Android 9 (Pie) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1.52 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Qmobile Matrix 2 with SP Flash Tool
- Confirm Qmobile Matrix 2 matches your exact device model and that the phone uses the MT6763 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.52 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Qmobile Matrix 2 free to download?
Yes, Qmobile Matrix 2 can be downloaded free of charge from this page.
How large is the download?
The Qmobile Matrix 2 package is 1.52 GB.
Which tool do I need to flash Qmobile Matrix 2?
Qmobile Matrix 2 is MediaTek MT6763 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Qmobile Matrix 2?
This firmware is Android 9 (Pie).
Which devices is this firmware for?
This file is intended for Qmobile devices. Always confirm it matches your specific model before flashing.