Qmobile LT360
Qmobile LT360 is a Qmobile firmware file listed under Qmobile, distributed as Qmobile_LT360_MT6572_05102019_4.4.2.zip with a download size of 690 MB. It is built for the MediaTek MT6572 chipset and runs Android 4.4 (KitKat), with a firmware build date of October 05, 2019. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 11 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Qmobile LT360
The Qmobile LT360 runs on Qmobile's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Qmobile LT360 back to square one. File Name: Qmobile_LT360_MT6572_05102019_4.4.2.zip File Size: 690 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. When it finishes, the Qmobile LT360 restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Qmobile LT360 |
|---|---|
| Package | Qmobile_LT360_MT6572_05102019_4.4.2.zip |
| Brand / Platform | Qmobile |
| Category | Qmobile |
| Chipset | MediaTek MT6572 |
| Android version | Android 4.4 (KitKat) |
| Build date | October 05, 2019 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 690 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Qmobile LT360 with SP Flash Tool
- Confirm Qmobile LT360 matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (690 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Qmobile LT360 free to download?
Yes, Qmobile LT360 can be downloaded free of charge from this page.
How large is the download?
The Qmobile LT360 package is 690 MB.
Which tool do I need to flash Qmobile LT360?
Qmobile LT360 is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Qmobile LT360?
This firmware is Android 4.4 (KitKat), built on October 05, 2019.
Which devices is this firmware for?
This file is intended for Qmobile devices. Always confirm it matches your specific model before flashing.