Qmobile i10i Pro
Qmobile i10i Pro is a Qmobile firmware file listed under Qmobile, distributed as Qmobile_i10i_Pro_MT6570_20170305_6.0.zip with a download size of 917 MB. It is built for the MediaTek MT6570 chipset and runs Android 6.0 (Marshmallow), with a firmware build date of March 05, 2017. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 19 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Qmobile i10i Pro
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Qmobile i10i Pro owners, this page hosts the original Qmobile stock ROM and the key file details. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Qmobile i10i Pro to factory condition. File Name: Qmobile_i10i_Pro_MT6570_20170305_6.0.zip File Size: 917 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. When it finishes, the Qmobile i10i Pro restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Qmobile i10i Pro |
|---|---|
| Package | Qmobile_i10i_Pro_MT6570_20170305_6.0.zip |
| Brand / Platform | Qmobile |
| Category | Qmobile |
| Chipset | MediaTek MT6570 |
| Android version | Android 6.0 (Marshmallow) |
| Build date | March 05, 2017 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 917 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Qmobile i10i Pro with SP Flash Tool
- Confirm Qmobile i10i Pro matches your exact device model and that the phone uses the MT6570 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (917 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Qmobile i10i Pro free to download?
Yes, Qmobile i10i Pro can be downloaded free of charge from this page.
How large is the download?
The Qmobile i10i Pro package is 917 MB.
Which tool do I need to flash Qmobile i10i Pro?
Qmobile i10i Pro is MediaTek MT6570 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Qmobile i10i Pro?
This firmware is Android 6.0 (Marshmallow), built on March 05, 2017.
Which devices is this firmware for?
This file is intended for Qmobile devices. Always confirm it matches your specific model before flashing.