Nokia 8 TA-1012
Nokia 8 TA-1012 is a Nokia firmware file listed under Nokia, distributed as Nokia_8_TA-1012_MT6739_ANT-0360-0-00WW-B02_ROM.zip with a download size of 896 MB. It is built for the MediaTek MT6739 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 16 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Nokia 8 TA-1012
Looking for the official stock firmware for your Nokia 8 TA-1012? You're in the right place. Below is the original Nokia flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Nokia 8 TA-1012 back to square one. File Name: Nokia_8_TA-1012_MT6739_ANT-0360-0-00WW-B02_ROM.zip File Size: 896 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. When it finishes, the Nokia 8 TA-1012 restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Nokia 8 TA-1012 |
|---|---|
| Package | Nokia_8_TA-1012_MT6739_ANT-0360-0-00WW-B02_ROM.zip |
| Brand / Platform | Nokia |
| Category | Nokia |
| Chipset | MediaTek MT6739 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 896 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Nokia 8 TA-1012 with SP Flash Tool
- Confirm Nokia 8 TA-1012 matches your exact device model and that the phone uses the MT6739 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (896 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6739 Firmware Guide: Flashing Tools and InstructionsThe MT6739 is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Nokia 8 TA-1012 free to download?
Yes, Nokia 8 TA-1012 can be downloaded free of charge from this page.
How large is the download?
The Nokia 8 TA-1012 package is 896 MB.
Which tool do I need to flash Nokia 8 TA-1012?
Nokia 8 TA-1012 is MediaTek MT6739 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Nokia devices. Always confirm it matches your specific model before flashing.